Guitar Neck Order Form

Printable Order Form for Fax, Email, and Mail Orders

This guitar neck will be made to your specific order.

It is imperative that we have all the relevant details to ensure you receive exactly what you want.
No changes will be accommodated once your order is submitted to us.
If you require assistance please call us (253)845-0403 or email us sales@warmoth.com

What guitar do you intend to install this neck on?
1. Choose your Scale & Construction Type of neck:
↓↓  Standard Features  ↓↓
  • Fingerboard .25" (6.35mm) thick
  • Double expanding truss rod
  • Gotoh Side Adjuster
    (Straight Peghead - Right Hand Only)
  • Cream or black phenolic face dots
  • 10"-16" compound radius fretboard
  • 25 1/2" Scale 22 frets
  • Flat bottom nut slot
  • Predrilled Neck Mounting Holes
2. Choose the peghead shape:
3. Choose the neck orientation:
Attn: Reverse Orientation is left hand construction with right hand side dots.
4. Choose the neck wood:
5. Choose the fingerboard wood:
Attn: All Warmoth necks with maple fingerboards use the same wood for the back of the neck. Therefore birdseye maple fingerboards always go on birdseye maple necks, etc.
6. Please write/type in the base price of the neck here: $
7. Choose the width of the neck at the nut:
8. Choose the back shape of the neck:
9. Choose the tuner hole size:
↓↓  Optional Features  ↓↓
10. Choose scalloped fingerboard:
Note: Only fret wire 6100 and SS6115 Stainless Steel can be used on scalloped fingerboards.
11. Choose the fret wire size:
12. Choose Fingerboard Inlay:
13. Choose peghead veneer:
14. Neck Binding:
15. Choose the 24 fret fingerboard extension:
16. Choose a custom nut preparation:
17. Choose a custom fingerboard radius:
18. Neck Mounting Holes:
19. Choose the neck finish:
(Please write or type in the finishing instructions)
$
19. Total Price: $
Additional Information/Instructions
Please write or type in any additional information or instructions you have for this neck.