This the same as the standard Gotoh Stop Tail Piece we carry but it has been specially modified by our creative friends at TonePros®. It features their patented locking Allen screws which positively lock the bridge to the posts for security and superior tone! No more worries about your Tail Piece falling off of your body when you change strings or loose, turning posts that change your string height by accident. The solid lock down also means vibration transfer is enhanced! This Stop Tail Piece is commonly used with the matching Tone Pros Tune-o-matic bridge which also has these patented locking set screws.
(Click on images to enlarge.)
Please Note: There are many versions of this type of bridge system available with a near equal number of stud diameters and spacing. If you are using this as a replacement bridge, please double check the dimensions to be absolutely sure it will fit.
A neck pocket angle of 1-1/2 to 3 degrees is necessary for proper operation. On a new Warmoth Body purchase, we can rout the correct angle in the neck pocket for just $10.00.
If you supply us with the studs and inserts or purchase this bridge piece on the same order as your body, we can install the inserts and studs for just $10.00.
|Comes complete with: |
|1 ||Stop Tail Piece |
|1 ||Pair of Studs and Inserts|
|1 ||Allen Wrench|
Insert holes are drilled .430" (10.92 mm) diameter to match these inserts. Notice that the bass side of the Tune-o-Matic is pulled back to accommodate intonation setting.
Recessed TOM with
String-Through Body Mounting
On Flat Top bodies only we offer a recessed rout for our Gotoh Tune-O-Matic or TonePros Tune-O-Matic with a choice of 3 string-through patterns. The strings go through our top-string-through ferrules and anchor in our standard guitar string ferrules in the back of the body.
Due to the bridge recess, a neck pocket angle is not required.
Three different String-Through patterns to choose from!