Single Saddle Bass Bridge, Small, Black

Warmoth Custom Guitar Parts

Proudly Made in America


Your Cart Is Empty

Mon - FRI 9AM to 5PM PST


NOTICE: We will be performing scheduled maintenance on our website on between the hours of 8:00 PM - 11:59 PM PST

Single Saddle Bass Bridge, Small, Black

Single Saddle Bass Bridge, Small, Black
Item #: IB31
Our Price: $27.50
Currently out of stock.
This new elegant design eliminates the need for the standard bridge base plate and each string rides on its own single piece of hardware! Sonic coupling between the string and body is second to none and the look is very unobtrusive and boutique. Each Single String Bridge has its own rout in the body and is held in place by a top screw and a through-body coupling bolt. Strings can be fed through the hollow coupling bolt on the back side of the body for string-through operation or anchored in the tail end of each bridge for top loading. Each bridge is adjustable for intonation and saddle height.

Warmoth/Hipshot Single String Bridge Top Warmoth/Hipshot Single String Bridge Side

* The string slot in the saddle comes in two sizes for large or small gauge strings. Use the large for B, E, and A strings and the small for D, G and C strings.

* The coupling bolts of this bridge are made specific for Warmoth Guitar Products. Similar bridges sold elsewhere will come with a coupling bolt not compatible with our body routs

* The coupling bolt requires a 3/16" allen wrench which is not included, though the wrench for saddle adjustment is included.

Comes complete with:
1 Bridge
1 Mounting Screws
1 Coupling Bolt
1 Allen Wrench for Saddle Adjustment

Single String Bridge Grounding Tips

* If you're using active pickups that are internally sheilded, like EMG's, the bridge does not need to be grounded.

* If you don't mind a slightly "visible" ground, lay a single strand of copper wire under the bridges before installation to connect them electrically, and ground the bridge closest to the control cavity using a ground wire as usual.

* You can also ground all the strings "invisibly" by grounding one string normally, and using either a brass string nut or a bar string retainer to connect the other strings.

Average Rating: (based on 1 review)

Showing 1 Review:

by Art Shand
on 10/6/2009
'Free Range' Saddle
These bridges certainly look cool... I use 'em on a solid walnut J-bass and the vibration transfer is very nice. Sustain is top notch due, I suspect, to the individual solid coupling of the string to body. I initially strung thru-body; I was a bit concerned with the 2 sharp bends the string takes. Sure enough- the DR High Beam D string broke (a first ever) after maybe 20 hours total playing. These bridges have a height adjust saddle that fits snugly (usually) and freely in the body of the bridge. In this case, the saddle fell out when the string broke unbeknownst to me. Lost and gone forever. I wrote Hipshot e-support and they immediately sent me a replacement saddle FOC. I've since secured each saddle with a very small bit of Blu-Tack (a type of putty) that has no effect on sound, but will keep the saddle in place should a string break. And, I've abandoned the thru-body stringing in favor of the less-stress in-line mode. These babies are very nice, but keep an eye on those saddles!
Review and Rate this Item
Comodo SSL

Copyright © 2018 Warmoth Guitar Products. All rights reserved.

Connect with Warmoth