Schaller Floyd Rose® Tremolo, Gold

This bridge is a Schaller licensed by Floyd Rose® tremolo system and features fine tuners on the bridge, a removable tremolo arm and original type saddles for plain end string anchoring. This bridge is different from the Original Floyd Rose® in that the main body is die cast with hardened steel inserts for fulcrum points. Sonically, this die cast design is slightly warmer sounding than the solid steel Original.

12" string radius (bridge).
10" string radius (locking nut).
String spread 2-3/32" (53mm).
37mm block.
Right handed only.

The string tightening screws for this bridge do not protrude as far out the back as the Original Floyd which means the looks are a bit cleaner and less wood needs to be removed for a recessed type body bridge rout.

Note: There are many bridges made under Floyd Rose® patents. Unfortunately, their physical dimensions are not uniform. On our bodies, we only offer routing for the Original Floyd Rose® tremolo and for the Schaller Floyd Rose® tremolo, both of which we sell. If you are buying a new Warmoth body and are either buying a bridge on the same order or can provide us with the studs and inserts, we can install the inserts in the body for just +$10. (Must be the correct size for our mounting holes).

Comes complete with:
1	Bridge
1	Tremolo Arm
3	Springs
1	Claw
2	Claw Screws
2	Mounting Studs
2	Allen Wrenches
1	Full Width Bar String Retainer with screws
1	Locking Nut - See Below

Please choose one of the following nut sizes to go with your bridge purchase
For Right Hand
R2	For 1-5/8" Nut width
R3	For 1-11/16" Nut width Narrow
R4	For 1-11/16" Nut width Wide
R5	For 1-3/4" Nut width