Gibson® Scale Conversion Necks
This neck allows you to convert the scale length of your 25-1/2" Fender® scale guitar to the shorter Gibson® scale of 24-3/4". This shortens the distance between frets and lowers string tension for easier, quicker playing.
Conversion Necks Compared
Warmoth replacement necks bolt directly on to any 25-1/2" scale guitar body that uses Fender's® vintage/original 2-3/16" (56mm) neck pocket dimensions. It is not necessary to modify the body or move the bridge. After installation simply re-intonate your guitar to match the new scale.
All Conversion Necks are built using Modern construction.
Modern necks represent over 30 years of innovation and refinement. In terms of playability and stability there is no finer neck on the market. Features include:
- Double-expanding truss rod
- Convenient side adjust mechanism*
- Unrivaled stability in all climates
- Modern feel and classic tone
- Widest range of custom options available anywhere
The Double Expanding Truss Rod
The adjustment nut on Modern necks is found at the heel. A convenient side adjust mechanism makes fine adjustments possible without removal of the neck*.
The Modern neck uses a double-expanding truss rod, installed in a flat slot directly under the fretboard. This rod floats freely within the neck, with only the backward force that counteracts the pull of the guitar strings being transferred to the wood. All the rod's inward compression is absorbed by rod itself. This makes the neck extremely stable through all climates and seasons (perfect for touring guitarists). It also means Modern necks are much less susceptible to warping over time than single rod necks.
You can choose Modern construction on all Warmoth straight-headstock neck styles. Most Warmoth specialty necks are built using Modern construction only, including the 7/8 Warhead neck, 12-String, Mustang/Jaguar, 7-String*, Bass6*, Gibson® Scale Conversion, and Baritone Scale Conversion* necks.
Many custom options, inluding binding, scallops, or inlay, are only available on Modern construction necks.
The force exerted by the headstock end of the double rod is considerable. There must be a minimum 1/8" of wood below the rod end to prevent wood failure in this area. Thinning a neck beyond factory engineered dimensions is not recommended or covered under warranty.
*Side adjust mechanism not available on left-handed, Baritone Conversion, Bass6, or 7-string necks.