Jazzmaster® Replacement Guitar Neck
Total Vintage Construction

Ways To Buy

Use the Warmoth Builder to design a body or neck just the way you want it. View every option we offer and spec your build down to the last detail.

The Builder guides you step-by-step and makes customizing your guitar or bass parts easy.

Build Custom build your own
Jazzmaster® Neck

The Warmoth Showcase lets you view photos and buy from our current selection of bodies and necks. We stock a large range of options so there

is a good chance what you’re looking for is already there. It’s the quickest and cheapest way to get the parts you need.

Browse IN STOCK
Jazzmaster® Necks

Features

We patterned our Jazzmaster® peghead shape directly from a 1962 Fender® Jazzmaster®. Slightly smaller than the later CBS peghead size and a bit larger than a standard Strat® peghead, this early 60's shape represents an unique era in vintage Fender® history.


Standard Features on Total Vintage Construction Necks

Total Vintage Construction

Our Total Vintage necks duplicate both the dimensions and construction methods used in the mid to late 50's. For those desiring a close replica of the early vintage Fender® necks, this is it. There is no finer neck of this type on the market. Features include:

  • Single-style truss rod that adjusts at heel
  • 7-1/4" radius fingerboard (other options available)
  • One piece maple necks with Walnut skunk stripe
  • Two piece mixed wood necks have no skunk stripe
  • 21 frets
  • Warm vintage tone

The Vintage Single-Style Truss Rod


Warmoth Total Vintage necks use a vintage-Fender®-style single truss rod design. The rod is attached to a fixed anchor at the headstock end of the neck. An adjustment nut at the other end is accessible through an opening at the heel. The rod sits in a concave channel within the neck, and is installed under the fingerboard on two piece necks, or through a long opening in the back on one piece necks. Once installed in its channel the rod takes a slightly curved or bowed position.

As the adjustment nut is tightened the anchor and nut, unable to pass through the narrow channel ends, begin to exert inward compression on the neck wood. The end of the rod is drawn outwards, and the center upwards towards a staight line. When the nut is loosened the rod relaxes back towards its neutral bowed position.

Characteristics of the Total Vintage neck include:

  • Light weight and minimum mass
  • The closest look and tone to vintage necks
  • Less torque needed for adjustment
  • A "Skunk Stripe" on one piece necks
  • Neck must be removed for adjustment
  • Usually requires seasonal adjustment for optimal action

Fingerboard Radius

The vintage radius is 7 1/4", very rounded. This is a very comfortable radius for rhythm playing as well as chording though it is pretty limiting for any string bending. Our compound 10-16" radius is also a standard option. Custom straight radiuses from 9" to 16" are also available for $35.00 extra. There are 21 frets.

Just add the prices shown below to the ones in the table above to pick the actual piece of wood used for your fingerboard! Make sure to include the fingerboard number with your order.

Select Your Fingerboard Wood




wood type
FB960 +$45
Flame Maple

wood type
FB1421 +$65
Flame Maple

wood type
FB817 +$40
Ebony (Macassar)

wood type
FB1348 +$45
Ebony (Macassar)

wood type
FB1549 +$65
Ebony (Macassar)

wood type
FB1516 +$45
Ebony (Black)

wood type
FB1624 +$45
Ziricote

wood type
FB1630 +$45
Ziricote

wood type
FB1857 +$45
Rosewood

wood type
FB1874 +$45
Indian Rosewood

wood type
FB1534 +$45
Pau Ferro

wood type
FB1917 +$45
Goncalo Alves

wood type
FB1174 +$45
Wenge

wood type
FB1177 +$45
Wenge

wood type
FB1770 +$65
Bocote

wood type
FB1776 +$65
Bocote

wood type
FB1717 +$45
Canary

wood type
FB1893 +$45
Kingwood

  • The grain pattern and color will change as the fingerboard is sanded and finished. You should expect some variation in appearance from the picture shown.
  • Warmoth's production managers have discretion to choose the way the fingerboard is oriented on the body wood for the best appearance and structural integrity.
  • If while in production the product is found to be substandard, we will not be able to continue with the piece you have chosen.
  • The charge for selecting a one-of-a-kind fingerboard is non-refundable for order returns, changes, or cancellations.

Available Options for Total Vintage Construction Jazzmaster® Replacement Necks

Click on the More Info for more information about that option.

OrientationMore Info

  • Left Handed
  • Right Handed
  • Right Handed Reverse

Nut WidthMore Info

  • 1-11/16" [$25.00]
  • 1-5/8"

Back ContoursMore Info

  • 59 roundback [$35.00]
  • Boatneck
  • Clapton [$35.00]
  • Fatback
  • SRV [$35.00]
  • Standard thin
  • Wolfgang [$35.00]

RadiusMore Info

  • 10-16" Compound
  • Straight 10" [$35.00]
  • Straight 10.5" [$35.00]
  • Straight 11" [$35.00]
  • Straight 11.5" [$35.00]
  • Straight 12" [$35.00]
  • Straight 12.5" [$35.00]
  • Straight 13" [$35.00]
  • Straight 13.5" [$35.00]
  • Straight 14" [$35.00]
  • Straight 14.5" [$35.00]
  • Straight 15" [$35.00]
  • Straight 15.5" [$35.00]
  • Straight 16" [$35.00]
  • Straight 7.25" (vintage)
  • Straight 9.0" [$35.00]
  • Straight 9.5" [$35.00]

Mounting HolesMore Info

  • No Mounting Holes [$15.00]
  • Standard 4 Bolt

String NutsMore Info

  • Black Corian - Earvana Nut [$65.00]
  • Black Corian - Standard Nut [$25.00]
  • GraphTech Black TUSQ XL - Earvana Nut [$69.00]
  • GraphTech Black TUSQ XL - Standard Nut [$30.00]
  • GraphTech White TUSQ - Earvana Nut [$69.00]
  • GraphTech White TUSQ XL - Standard Nut [$30.00]
  • LSR Prep [$45.00]
  • No Nut Install
  • White Corian - Earvana Nut [$65.00]
  • White Corian - Standard Nut [$25.00]

Tuner HolesMore Info

  • Gotoh/Grover (13/32" 11/32")
  • Planet Waves(13/32")
  • Schaller (25/64" 11/32")
  • Sperzel (25/64")
  • Vintage Style (11/32")

Fret SizeMore Info

Nickel

6100
.118" X .058"

$0.00

6105
.095" X .045"

$0.00

6130
.106" X .036"

$0.00

6150
.103" X .046"

$0.00

6230
.080" X .037"

$0.00

Stainless Steel

SS6105
.095" X .047"

$20.00

SS6115
.108" X .051"

$20.00

SS6230
.080" X .043"

$20.00

SS6100
.110" X .057"

$20.00

SS6150
.104" X .047"

$20.00

Gold

GD6150
.104" X .047"

$30.00

GD6100
.110" X .057"

$30.00

Fretless

Lined Fretless

$85.00

Fretless

$0.00

No Frets

No Frets Slots Only

$0.00

InlaysMore Info

Dots

Mother Of Pearl Dots

$20.00

Black Face Dots

$0.00

Cream Face Dots

$0.00

Abalone Face Dots

$20.00

No Inlay

$0.00

Black Mother Of Pearl Dots

$20.00

Arizona Turquoise Stone Dots

$20.00

Bloody Basin Jasper Dots

$20.00

Azurite Malachite Dots

$20.00

Coral Dots

$20.00

FinishesMore Info

Clear Gloss

$90.00 - Maple Necks with Maple Fingerboards (Entire neck will be finished)

$80.00 - Maple Necks with non-maple Fingerboards (No finish on the fingerboard)

$110.00 - Non-Maple necks (No finish on the fingerboard)

Clear Satin

$80.00 - Maple Necks with Maple Fingerboards (Entire neck will be finished)

$70.00 - Maple Necks with non-maple Fingerboards (No finish on the fingerboard)

$100.00 - Non-Maple necks (No finish on the fingerboard)

Vintage Tint Gloss or Satin

$110.00 - Maple Necks with Maple Fingerboards (Entire neck will be finished)

$100.00 - Maple Necks with non-maple Fingerboards (No finish on the fingerboard)

$130.00 - Non-Maple necks (No finish on the fingerboard)

Pricing Table

Fingerboard Woods



Neck Woods
One Piece NeckIndian RosewoodPau FerroIndian Rosewood (Dark)BubingaGoncalo AlvesPurpleheartBloodwoodWengeEbonyKingwoodZiricoteFigured ZircoteEbony (Black)Ebony (Macassar)
Maple$157$157$167$182$192$207$232
Mahogany$177$187$202$212$227$252
Birdseye Maple$193$193$203$218$228$243$268
Quartersawn Maple$197$197$207$222$232$247$272
Flame Maple$237$237$247$262$272$287$312
Indian Rosewood$337$347$362$372$387$412
3A Flame Maple$357$357$367$382$392$407$432
3A Birdseye Maple$357$357$367$382$392$407$432

Ways To Buy

Use the Warmoth Builder to design a body or neck just the way you want it. View every option we offer and spec your build down to the last detail.

The Builder guides you step-by-step and makes customizing your guitar or bass parts easy.

Build Custom build your own
Jazzmaster® Neck

The Warmoth Showcase lets you view photos and buy from our current selection of bodies and necks. We stock a large range of options so there

is a good chance what you’re looking for is already there. It’s the quickest and cheapest way to get the parts you need.

Browse IN STOCK
Jazzmaster® Necks

Select Your Language

Copyright © 2014 Warmoth Guitar Products. All rights reserved.

Connect with Warmoth