Rear Rout bodies have a control cavity that allows positioning of the switch and pot holes. Standard potentiometer hole diameter is 3/8" (9.53mm). Cavity depth is 1-1/2" (38.10mm) leaving a face thickness of approximately 1/4" (6.35mm), except in the area of the switch where the thickness is only .090" (2.29mm). Carved Top bodies will have slightly thicker tops and require the long shaft potentiometers. There is no extra charge to have any or all the control holes cut in their standard positions. All rear routed bodies are supplied with a recessed cover plate and mounting screws.
Select F-Hole Number
Select Control Routing Layout
Order Code
This is Warmoth’s way of describing control routs on a body. Use this for reference when discussing specifications with a Warmoth rep over the phone or by email.
