This bridge is a vast improvement over the vintage standard Gibson® Tune-o-matic bridge! The free end of these intonation screws are secured on a rivet, not with a flimsy retainer wire, so the saddles will not pop out when changing strings! This bridge has a string spread of 2-3/64"(52mm). This bridge is commonly used with our matching Stop Tail Piece. Works for both right handed and left handed bodies.
(Click on image to enlarge).
A neck pocket angle of 1-1/2 to 3 degrees is necessary for proper operation. On a new Warmoth Body purchase, we can rout the correct angle in the neck pocket for just $10.00.
If you supply us with the studs and inserts or purchase a bridge on the same order as your body, we can install the inserts and studs including ground wire for just $10.00.
NOTE: There are many versions of this type of bridge system available with a near equal number of stud diameters and spacing. If you are using this as a replacement bridge, please double check the dimensions to be absolutely sure it will fit.
|Comes complete with: |
|1 ||Bridge |
|1 ||Pair of Studs and Inserts|
Insert holes are drilled .430" (10.92 mm) diameter to match these inserts. Notice that the bass side of the Tune-o-Matic is pulled back to accommodate intonation setting.
Recessed TOM with
String-Through Body Mounting
On Flat Top bodies only we offer a recessed rout for our Gotoh Tune-O-Matic or TonePros Tune-O-Matic with a choice of 3 string-through patterns. The strings go through our top-string-through ferrules and anchor in our standard guitar string ferrules in the back of the body.
Due to the bridge recess, a neck pocket angle is not required.
Three different String-Through patterns to choose from!